User Manual

6
3 0-255
Pan speed（ invalid during endless rotation, 226-235. Light OFF when
scanning
，
236-255
：
max speed
）
4 0-255 Red dimming
5 0-255 Green dimming
6 0-255 Blue dimming
7 0-255 White dimming
8 0-255 Yellow dimming
9 0-255 UV dimming
10 0-255 0-15 No function
16-95 Synchronous strobe – strobe speed
96-175 Strobe Flash once per second. Flash Duration from short to long.
176 – 255 Asynchronous strobe: Strobe flash probability from high to low
11 0-255 Master dimming
12 0-255 0-25 No function
26-205 Fixed Colours - each 20 value mean 1 colour (eg 26-45 red)
206-255 Colour changing (changing speed from fast to slow)
13 0-255 Macros (built in programs as below)
0-55 No function
56-75 Sound control，each sound will switch to next Marcos as below, sound
sensitivity from low to high 40-80%
NOTE: this is not controlled by the sound sensitivity in MENU. The sound
sensitivity setting in MENU is valid for sound function in Auto only
76-105 Red，clockwise rotation
106-135 Blue, anti-clockwise rotation
136-165 7 colours changing, clockwise rotation
166-195 7 colours changing, anti-clockwise rotation
196-225 7 colours changing, with strobe (strobe 3 seconds，light on 7
seconds)，clockwise rotation
226-255 7 colours changing，with strobe (strobe 3 seconds，light on 7
seconds)，anti-clockwise rotation
DMX-512 Control Connection
Using a 3 pin XLR cable, you can connect the product to a DMX controller and then to
other fixtures with 3 pin XLR inputs and outputs. When not using DMX, multiple
fixtures can be connected together and operate under master/slave control. The signal
cable should have two core with shielded cable, the signal connectors are XLR input
and output connectors. Please refer to the below diagram: