User Manual

www.event-lighting.com.au

Dimensions

Control Panel

Buttons

(1) MENU – Select an operation mode or return to previous screen.

(2) ENTER – Confirm the selected function.

(3) UP – Increase parameters.

(4) DOWN – Decrease parameters.

Indicators

(5) DMX signal LED indicator (Flash/Off)

(6) Slave Mode LED indicator (Flash/Off)

(7) Master Mode LED indicator (Flash/Off)

(8) Sound Active Mode LED indicator (Flash/Off)

• The LED Display will switch off after 10 seconds. Press any button to turn it back on.

• The fixture will automatically save the selected setting after a few seconds.

• When NITROBALL is connected via DMX or SLAVE signal, it automatically activates

DMX or SLAVE mode. If you disconnect it, NITROBALL will return to the previous setting.