User Manual

7
www.event-lighting.com.au
192
207
Red+Blue+Green+White
208
223
Jump Effect
224
239
Fading Effect
240
255
Pulse effect
14
12
0
255
Macro speed
Slow to fast
15
13
0
79
Special functions
TBD
80
84
Reset all motors
85
87
Reset pan/tilt motor
88
96
TBD
97
99
Reset zoom motor
100
109
Internal program 1
110
119
Internal program 2
120
129
Internal program 3
130
139
Internal program 4
140
149
Internal program 5
150
159
Internal program 6
160
169
Internal program 7
170
179
Internal program 8
180
189
Internal sound program 1
190
199
Internal sound program 2
200
209
Internal sound program 3
210
219
Internal sound program 4
220
229
Internal sound program 5
230
239
Internal sound program 6
240
249
Internal sound program 7
250
255
Internal sound program 8
The device is controlled by universal DMX 512 protocol, DMX address is the start channel used to
receive instructions from the external controller. For independent control, each fixture must be
assigned its unique address control channels. For example, this device has two channel modes:
15/13, if we set the mode at standard 13 channels mode, and there are several models need to be
independently controlled, we just simply address first fixture at 1, and second fixture at 14, third one at
27, etc.
• If the devices have the same address, they will behave synchronically.
• Display is flashing when no DMX signal is received.