User Manual

Vector
Mode
Value
Function
14
Colour Time
0..255
Colour speed, fast to slow
15
Gobo Time
0..255
Gobo speed, fast to slow
The device is controlled by universal DMX 512 protocol, DMX address is the start channel used
to receive instructions from the external controller. For independent control, each fixture must be
assigned its unique address control channels. For example, this device has two channel modes:
13/15, if we set the mode at standard 15 channels mode, and there are several models need to
be independently controlled, we just simply address first fixture at 1, and second fixture at 16,
third one at 31, etc.
• If the devices have the same address, they will behave synchronically.
• Display is flashing when no DMX signal is received.
More Functions
• Software upgrade function via DMX cable. If there is any new firmware for this device, it
can be upgraded simply via a software upgrade box, without the need to change any
mechanical parts. The upgrade box is not included in the package, if you need any
further assistance please contact your authorized dealer.
• Hibernation. The device will enter sleep mode if activated after a period of disconnecting
DMX signal to save power and will wake immediately when the DMX signal is sent or
received again.
Technical Specifications
Photometric
• Light Source: 150W White LED 7,500K
• Beam Angle: 2°
• Output: 32,300lux @ 5m
• PWM: 500Hz
• LED Lifespan: 50,000hours
Colour
• 1 colour wheel (14 Colours + Open)
Gobo
• Fixed: 1 x (17 + open) fixed gobo wheel