User Manual

www.event-lighting.com.au

6. Once the latches are secure, the crowd barrier is in place. Repeat the process until the wall is

complete.

Note that all barriers and corners will follow a similar process, refer to individual manuals on

correct and safe way to connect those components.

Undoing.

Using an allen key, turn the latches clockwise to undo, making sure to

turn all the way to release each part from each other. Always start from

outer-most units first. Loosen nut of floor holding screw, and remove

screw.

Lift smaller frame behind wall and carefully push forward on the wall

part from near the base, while standing on the floor and lower the wall towards the collapsed

position, making sure the smaller frame folds in with it.

Be sure to keep hands and fingers away from folding parts.

Repeat process for each crowd barrier.