User Manual

www.event-lighting.com.au
3
Menu
Values
Description
Addr
A001-A512
Set the DMX address.
Chnd
6Ch/9Ch/16Ch/30Ch/58Ch
Set the DMX channel mode.
SLnd
nast/SL1/SL2
Master/Slave 1/Slave 2 mode
Soun
So0…So16
Se99…Se0
Sound active mode.
Adjust sound sensitivity.
Auto
Au0…Au16
Sp0…Sp9
Auto mode.
Adjust auto run speed.
Color
Co1…Co15
Select colour
nanu
Red 0…255
Green 0…255
Blue 0…255
White 0…255
Manually adjust colour values.
Disp
Disp
Display settings.
Ver
V20
Display current software
version.
DMX Chart
This fixture is controlled by the universal DMX 512 protocol. The DMX address is the first
channel used to receive instructions from the external controller. For independent control,
each fixture must be assigned a unique address for each of its control channels. For
example, this device has five channel modes: 6/9/16/30/56, if it’s set to 6 channel mode, and
there are several fixtures need to be independently controlled, we just simply address first
fixture at 1, and second fixture at 7, third one at 13, etc. !
• If multiple fixtures have the same DMX address, they will behave synchronically. !
• Display will flash when no DMX signal is received. !
! !