User Guide

15 16
BOOSTER SEAT WITH BACKREST BOOSTER SEAT WITHOUT BACKREST
The child seat MUST be used with a 3-point vehicle seat belt when
used as
a booster.
1. Remove the backrest from the seat.
2. Put the booster on a forward-facing vehicle seat.
3. Have child sit on booster seat so their back contacts vehicle seat from
bottom.
4. Position vehilcle belt over child .Make sure the vehicle lap belt passes
underneath
both armrests of the booster seat, and the vehile shoulder
5. The vehicle belt passes over the center of the child’s shoulder (6b).
shoulders to
armrest on the side where the seat belt is buckled
not twisted and then buckle it.Contact
about this point.
the child restraint manufacturer if in doubt
(6b). Check that the vehicle belt is
belt passes under the
Please follow the red woven label
to install the safety belt.
3b
CLICK
6b
)gk63-22 :thgieW s’dlihC(
0-125cm
Height is less than 125cm.Do NOT use
Group III(22-36kg)Booster seat.