User Guide

13 14

5a 5b

BOOSTER SEAT WITH BACKREST BOOSTER SEAT WITH BACKREST

The child seat MUST be used with a 3 point vehicle seat belt when

used as a booster. The harness will need to be removed.

1. Put the child seat on a forward-facing vehicle seat. (5a)

2. The headrest height can be adjusted by pulling out the adjustment button

and

at the same time pushing the headrest up and down. Make sure the

headrest is

locked into place. (5b)

3. Have the child sit on the booster seat so their back contacts the backrest

from

shoulders to bottom. (5c)

4. Position the vehicle belt over the child. Make sure the vehicle lap belt

passes under both armrests of the booster seat, and the vehicle shoulder

belt passes under the

armrest on the side where the seat belt is buckled

and through the upper belt guide.

Check that the vehicle belt is not twisted and then buckle it. (5c)

5. Adjust the headrest to fit the child. so the vehicle belt passes over the

center of the

child’s choulder. (5b)

To remove the backrest

One hand hold the seat base, and the other hand push the backrest strongly.

(5d)

Please follow the

red woven label

to install the

safety belt.

(Child’s Weight: 15-36kg) (Child’s Weight: 15-36kg)