User Guide

9 10

According to the child’s size adjust the headrest (5b).

ADJUSTING HEADREST

d3c3b3

g3f3e3

3e 3f 3g

3c 3d

CHILD RESTRANT WITH HARNESS

The child seat MUST be used witha3-point vehicle seat belt when

used

as a child restraint with harness.

1.Put the child restraint ontoaforward-facing vehicle seat (4a).

2.Route the vehicle belt latch plate (4b,4c) from the front of the child

restraint towards the back through the slot of the front of the

backrest .

3.Pull the adult belt from the retractor, thread one end through

behind the

arm rest, then insert the adult belt from the back slot;

another upper end of

adult belt goes following the routing area,

and then pull it out of the back

slot; then rout the belt over the

back to another side, and then pull the

adult belt out of another

belt slot; make sure the upper piece of adult belt

put pass through

the belt g

uide part, and the lower piece of adult belt go

under

the arm rest, finally buckle, adjust the adult belt(4d).

(Child’s Weight: 9-18kg)