Troubleshooting guide

Page 95
Clinker Removal System – Slide-Out Bottom
Location: The Slide-Out Bottom is located below the Burn Pot and the lower rod is
used to pull the slide open to drop the clinker. See figure 22 on page 97.
See Figures 10 through 13 on Pages 72 through 74 for more information
on dropping the clinker
Purpose: Once the Burn Pot has filled with clinker residue the clinker can be
dropped out through the bottom of the pot.
Air Flow
Combustion Air / Exhaust Flow
The flow of Combustion air (also called Exhaust Flow) through all St. Croix Multi-Fuel
stoves follows a path similar to the one shown in the example below.
Figure 20
Legend:
1 – Air intake tube 4 – Heat Exchange Area 7 – Exhaust Outlet
2 – Burn Pot 5 – Hot Air Plenum
3 – Firebox Area 6 – Exhaust Duct area