Troubleshooting guide

Page 22
Ashby Multi-Fuel Burn System Data Chart
Based on a default Cycle Time of 11.5 seconds.
Cycle time equals the ON time & OFF Time combined.
The following Chart is in reference to burning Corn in Program 1.
The Voltages shown in the Chart reflect a line voltage of 120 volts. Actual numbers
may vary based on the actual line voltage provided to the control board and the +/-
Tolerance of the Electronic Components used in the Control Board.
Heat Level
Selection
A uger ON
(Seconds)
Combustion
Fan Voltage
+/- 3 Volts
Convection Fan
Voltage
+/- 3 Volts
Corn Fuel
(Lbs./Hour)
+/- 10%
Start-Up
Cycle
Off for the first 5
minutes
100 Volts OFF NA
1 1.5 90 Volts 90 Volts 1.7 Lbs.
2 2.0 98 Volts 98 Volts 2.25 Lbs.
3 2.5 108 volts 108 volts 3.1 Lbs
4 3.0 115 volts 115 volts 3.7 Lbs.
5 3.5 120 volts 120 volts 4.25 Lbs.