Troubleshooting guide

Page 12
Zero Clearance Cabinet
The Ashby Insert is approved for installation into the St. Croix Zero Clearance Cabinet.
The Cabinet ships knocked down to
make it easier to ship. Put together it is
a simple metal cabinet that gets framed
in
The Ashby can be installed as a Rear
Vent System or as a Top Vent System
if the situation dictates one or the
other.
Figure 14
How to build the Cabinet
Step 1
Note the orientation of the Vent
hole and the Air Intake Hole on the
back panels.
Locate the 2 back panels and place
the units together as shown and
screw the panels together.
Figure 15