Troubleshooting guide

Page 9
Removable Base Extension and Bolt-On Ashpan
Figure 10
These removable parts show the various different ways to set up the Ashby Insert.
The Multi-Fuel Insert is limited by the fact that the Bolt-On Ashpan is an integral part
of that Burn System and cannot be removed.
The unit may fit better in some Zero Clearance manufactured Fireplaces by removing the
Bolt-On Base Extension.
An Ashby without the Bolt-On Ashpan must have the Bolt-On Cover Plate and gasket
installed close the opening to the Bolt-On Ashpan. Be sure to order the correct
Surround system when removing the Bolt-On Ashpan.
Built in Vent Clean-Out System
The Ashby has a unique Clean-Out system built in that allows the vent system to be
cleaned out without having to pull the Insert from the fireplace.
Access to this cleanout is behind the left side Clean-Out Cover. Behind the Cover is a
Rod that pulls out, opening a Slide Door that allows any Fly-Ash that has built up in the
vent system to drop into the Cleanout Area. By using a small vacuum (1.25” O.D.) hose
it can now be vacuumed out through the front of the Insert, without having to pull the
insert.