Troubleshooting guide

Page 27 - 27 -
Program 1 - The Cycle Time is 7.5 seconds. This
program will be the default program when the
Stove is first plugged in. This program is for use
with Pellets and Cherry Pits.
Program 2 - The Cycle Time is 8.5 seconds. This
program is for use with Pellets, Corn, Wheat, Rye,
Cherry Pits and Distillers Grain Pellets.
Program 3 - The Cycle Time is 9.5 seconds. This
program is for use with Pellets, Corn, Wheat, Rye,
Cherry Pits and Distillers Grain Pellets.
Program 4 - The Cycle Time is 10.5 seconds. This
program is for use with Pellets, Corn, Wheat, Rye,
Cherry Pits and Distillers Grain Pellets.
Figure 1
This diagram shows the location
of the Relay and also shows how
the Revolution Pot Gearmotor is
installed. It is installed inside the
Ashpan area. The Lincoln SCR
uses all of the designs described
in the previous section covering
the SCF-Revolution. Please read
pages 4 through 12 if you haven’t
already done so.
Figure 2