Troubleshooting guide

Page 25 - 25 -
Lincoln-SCR Burn System
Please read Section 1 completely before reading section 2 for the Lincoln-SCR. The
information in Section 1 that covers the Drive system, Switches, Pot Removal, Pot
Cleaning is identical to the Lincoln SCR. In an effort not to duplicate all of that infor-
mation, we refer you back to Section 1.
Figure 1A
Access to the Revolution Burn Pot system is a little different than the furnace, but over-
all the designs are the same. Please refer to Figure 1A for more details. Removing the
ignite gives access to cleaning the holes in the front and back of the burnpot. Please re-
fer to Section 1 for more information on cleaning the holes in the burnpot.
The newsletter for Technical and Warranty issues
Lincoln-SCR Service Manual Addendum
1/5/10
Lincoln-SCR Access to Burn
System Components
25
Lincoln-SCR - General infor-
mation
Lincoln-SCR Control Board
Pages 26-27
26
26
Troubleshooting Flow Carts
for the Lincoln-SCR
Lincoln-SCR Convection
Blower Pages 28-29
28
28
Troubleshooting the High
Limit Switch Pages 8-12
For all Remaining Compo-
nents Refer to the existing
Troubleshooting Flow Charts
as listed on page 30
29
30
Lincoln-SCR Data Table
Lincoln-SCR Wiring Sche-
matic
31
32
Lincoln-SCR Parts Layout
Pages 33-34
Lincoln SCR part numbers
Pages 35-36
33
35
Lincoln SCR - Section 2
TechNet
Manufactured and Distributed by Even Temp, Inc.