Troubleshooting guide

Page 19 - 19 -
SCF-Revolution Data Table
Based on a Cycle Time of 5.5 seconds.
Cycle time equals the ON time & OFF Time combined.
Heat Level
Selection
A uger ON
(Seconds)
Combustion
Fan Voltage
+/- 10%
Convection Fan
Voltage
+/- 10%
Pellets
(Lbs./Hour)
+/- 10%
Start-Up
Cycle
3 min ON
6 Min OFF
9 Min Level 1
Line Volts OFF NA
1 2.5 90 Volts 120 Volts 2.5 Lbs.
2 3.0 100 Volts 120 Volts 3.6 Lbs.
3 3.5 106 volts 120 Volts 4.7 Lbs
4 4.0 112 volts 120 Volts 5.8 Lbs.
5 4.5 120 volts 120 Volts 6.9 Lbs.
The Voltages shown in the Chart reflect a line voltage of 120 volts. Actual numbers
may vary based on the actual line voltage provided to the control board and the +/-
Tolerance of the Electronic Components used in the Control Board.
The SCF-Revolution is approved for Corn, Wheat, Rye, Cherry Pits, Distiller’s
Grain Pellets and Wood Pellets. Feed rates will vary from fuel to fuel and from
program to program. The above chart is in reference to burning Pellets in Program
4 which has the highest BTU Rating for Pellets.