Troubleshooting guide

Page 6 - 6 -
Figure 6
The Revolution Burn System is designed to come apart for maintenance or to replace the
Drum if needed.
Revolution Pot Clean-Out Access Cover
There is a cover in the front of the furnace that gives access to cleaning the holes in the
front and back of the Revolution burn pot. The holes should be checked periodically to
keep the units burning properly. For proper Ignition the hole in the front of the pot for the
Igniter needs to be kept open. If a change is noticed in how the Furnace Ignites, shut the
unit down and clean the hole. See Figure 7 on the following page for more information.