Specifications
SCF-050 Manual
51
a. The default Pilot setting has an On Time of 2.5 seconds.
The #1 LED light indicates the default pilot setting. This
setting requires little fine tuning.
b. Pressing the Feed Trim button once will turn the #1 and
#4 LED lights on at the same time. This reduces the On
Time to 2.0 seconds. Less Fuel means more adjusting.
See the figure to the right for details.
Figure 26
c. Pressing the Feed Trim button again will turn
on the #1 and #5 light at the same time This
reduces the On Time to 1.5 seconds. Again,
less Fuel means more adjusting.
See figure to the left for more details
Using the auger trim button is also helpful
when trying to keep the glass cleaner when
burning on the #1 setting. The more fuel on
low will usually mean less build up on the
glass.
Figure 27