Specifications

SCF-050 Manual

Baffle Removal

To remove the baffle, lift the back of the

baffle up to clear the inner back of the

Furnace and slide towards the front of the

Furnace. The baffle will slide out of the

keyhole slots and drop down. When

putting the baffle back in the Furnace,

make sure the screws are in the keyhole

slots and the back of the baffle is lifted

up over the inner back to keep the

Baffle locked in place.

Figure 22

5. Exhaust System. Periodic cleaning of the exhaust system is required. Under certain

conditions chimneys may plug up rapidly. Dirty/High moisture content Corn, wheat

rye or distiller’s grain and poor installations require more frequent chimney cleanings.

See Page 20 “Preventing Chimney Fires”. The products of combustion will also

contain small particles of fly ash. The fly ash will collect in the exhaust vent and

restrict the flow of the flue gases. Judge the frequency of cleaning by checking the

amount of ash that accumulates in the elbows or tee’s of the exhaust system. Ask the

dealer for suggested frequency of cleaning, equipment needed and procedures for

cleaning. Check the Exhaust system and Ash Traps at least once every two months

during the heating season.

6. Gaskets. Periodically inspect the condition of the rope gasket around the door,

window and ash door. Replace as needed.

7. Air Filter. Check the Return Air Filters at least once a month and replace when

needed. The size of the filter is 1” x 12” x 25”.