Specifications

SCF-Revolution Manual

VENTING: APPROVED MATERIALS

The Furnace requires a venting system approved for pellet Furnaces by a certified testing lab.

Approved pellet Furnace venting materials are: 1) PL vent, a double wall vent with a stainless

steel liner; and 2) Single wall rigid or flexible stainless steel pipe. PL Vent and Single wall vent

is available through manufacturers such as: Energy Vent LTD, James A. Ryder, Simpson

DuraVent and Selkirk Metalbestos and is carried by many local pellet Furnace dealers. In this

manual approved venting will be referred to a “PL vent” or “Single wall vent”. All single wall

vent adaptors must be stainless steel.

NOTE: TYPE “B” GAS VENT MUST NOT BE USED IN THE INSTALLATION OF THIS

FURNACE

Examples of venting system components follow:

High temperature ceramic roping reduces potential fly ash escaping through joints.

Stainless steel inner liners resist corrosive flue gas damage to the system.

Flex pipe should be stainless steel, 4 ply construction with a total thickness of approx. .07 inches.