Instruction Manual

EVCO S.p.A. EVF818 | Installer manual ver. 1.0 | Code 144F818E104
page 58 of 76
ESt
Configuration parameters download not completed successfully alarm.
Solutions:
- press and release a key to restore normal display
- download the configuration parameters again.
Main consequences:
- the alarm output will be activated.
CEr
Configuration parameters firmware contained in EVKEY not coinciding with that of the device.
Solutions:
- cut the device power supply off
- check that the configuration parameters firmware contain in EVKEY coincides with that of the
device
- download the configuration parameters again.
Main consequences:
- the alarm output will be activated.
Erd
Configuration parameters upload not completed successfully alarm.
Solutions:
- to restore the factory settings
- upload the configuration parameters again.
Main consequences:
- the digital outputs will be switched off.