User Manual

Every Control S.r.l.
Via Mezzaterra 6, 32036 Sedico Belluno ITALY • Phone [phone] (a.r.) • Fax [phone] • [e-mail] • www.everycontrol.it
44
CONFIGURATION PARAMETERS AND DEFAULT VALUES SUMMARIZING TABLE
User Menu configuration parameters
PPP -999 9999 ---- -19 Operator Menu password value
Notes
• the symbol (1) indicates that the parameter is available both to the first and to the second level
• the symbol (2) indicates that the parameter is available to the first level only
• the symbol (3) indicates that the unit of measure depends from the parameter /5P and from the parameters /A6 and /A7 (the parameters /
5P, /A6 and /A7 belong to the User Menu; see the chapter User Menu on the page 32)
• the symbol (4) indicates that the unit of measure depends from the parameter /bE (the parameter /bE belongs to the User Menu; see the
chapter User Menu on the page 32): if the condensing probe is a 2 wires 4-20 mA pressure transducer the unit of measure depends from the
parameters /5P, /b6 and /b7 (the parameters /5P, /b6 and /b7 belong to the User Menu; see the chapter User Menu on the page 32), if the
condensing probe is a PTC probe the unit of measure depends from the parameter / t (the parameter / t belongs to the User Menu; see the
chapter User Menu on the page 32)
• the symbol (5) indicates that during the status ON the parameter is available both to the first and to the second level.