User`s manual

8. You can program text values for function keys to be sent from the terminal window. Some

function keys are pre-programmed, but you can change it any time in configuration options

(View->Options->Terminal Func Keys).

In the View->Option->Assembler menu, make sure that the chip family is 68HC12, not

68HC11. If you would like to use your own assembler, you can replace the as12.exe with the

name of your own assembler.

9. The screen is divided into two windows. The top window is for editing your source code and

the bottom window is shared by the message window and the terminal window.

If the terminal options are set correctly, you should see the following prompt every time the

reset button on the MiniDragon-Plus3 board is pressed. If you do not see this, the bottom

window may be set for message window. Sometime it’s a little confusing when terminal

window is disabled and the message window does not display what you have typed. In order

to enable terminal window you have to click the terminal button in the bottom window to

enable the terminal window display, then move the cursor to any location in the terminal

window and click the left button on the mouse. After seeing a solid block cursor flashes, press

the <Enter> key and it will enable the terminal window.

D-Bug12 v4.0.0b32

For Commands type "Help"