Elvi installation manual
I’m home! Let’s get started.
contents general contents 1 safety precautions 2 components and features 3 Errors or Inaccuracies For any inaccuracies or omissions, or to provide feedback and suggestions, send an email to help@evbox.us. 1. unpack Elvi 5 2. install wall dock 7 3. install charging cable 11 4. install station 12 5. activate Elvi 13 6. install cable dock (optional) 7. change charging cable (optional) 14 16 8. charge with Elvi 18 9. troubleshooting 19 10. warranty 21 11.
1. safety regulations 1. safety regulations Please read the documentation provided with the charging station to familiarize yourself with the safety instructions and directions before you install, operate or maintain the charging station. • Warning: risk of electric shock • • • • • • • • • • Always switch off power to your charging station at the circuit breaker before installing, maintaining or servicing the product.
1. safety regulations FCC REGULATORY STATEMENTS This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions. 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
components & features Cable dock (sold separately) 6.37 .2 3.7 2 2 Housing Elvi consists of a wall dock, a charging station and a charging cable. Elvi is designed with rugged, high-impact strength plastics that make its housing durable, robust, weather-resistant and wear-resistant. Dimensions (inch) 7.8 Elvi is connected via a built-in dual band WiFi connection or via an optional UMTS modem. Start and stop your charging session with your charge card, key fob or remotely via the app. 12.
3. technical specifications 9 Item Description Connection capacity 120 / 240 V AC - 60 Hz Output power (via charging cable) max 32 A, 2-phase installation (3.7 - 7.4 kW) Temperature range -13 °F to +140 °F (-25 °C to +60 °C) for storage and operation Operating humidity Max. 95% - non condensing Max. Installation height 6560 ft (+2000 m) above sea level Housing Polycarbonate UL94 V-0 Dimensions (LxWxH) 13 x 7 x 6 in (328 x 186 x 161 mm) Weight 24.
1. unpack Elvi 1. unpack Elvi 1.1 Place Elvi package on a flat and stable surface. Remove sleeve. 1.2 Set the boxes aside. Box 1 contains the charging station. Box 2 contains the charging cable. Wall dock already installed? NO Go to next page Open the charging station box. Put the instructions folder (A) aside. The keys (B) found in this folder are only needed for removing the charging station (C) from its wall dock (D) (in case of maintenance or to change the charging cable).
2. install wall dock Safety requirements Warning: Always perform a visual inspection for damage before starting a charging session. Check that the contact area of the charging plug is free from dirt and moisture; check the charging cable for cuts or abrasions to the insulation and check the charging cable plug of Elvi for firm seat. Connecting and installing this product must be done by a qualified electrician.
2. install wall dock 2. install wall dock Tools you need to install the wall dock Included in the box Installation steps Not included in the box Flat head screwdriver 2.1 Select a solid and flat vertical surface for installing the wall dock. Ensure that the surface is even and solid enough to resist a pull force of at least 220 lbs (100 kg). bubble level drilling machine 1x bit T20 1x bit T30 8mm drill knife 2.3 Place the drilling template onto the wall and use a level device (e.g.
3. activate Elvi 3.1 Download your mobile Elvi station management application from the location provided by your operator or service provider. For more details, contact your operator or service provider. 3.2 Log in to your account in the app. If you don’t have an account yet, create a new account in the app. Register Elvi in the app by adding its station ID and security code. Find the station ID on the back of your Elvi or in the supplied folder inside the Elvi packaging.
4. install station Tools you need to install the station 4. install station Post-installation check list • • • • The LED ring must be solid GREEN when in the ready state. Initiate a charge session and use an EVSE tester. The LED ring should turn blue when the charging session is in progress. For Elvi with cellular connectivity it might be required to contact your stations’ operator or service provider to commission your Elvi and its cellular connection. Maintenance No specific tools needed for this step.
5. install cable dock 5. install cable dock sold separately 5.4 Place the cable dock’s wall base on the wall and fasten the screws. Do not overtighten. Tools you need to install the cable dock Included in the box 3x screw 6x70mm Bit T30 3x plug 8x65mm Not included in the box drilling machine pencil 8mm drill The Elvi cable dock is sold separately. Contact the supplier of your Elvi for details about options and accessories. 5.1 Unpack your Elvi cable dock.
6. change charging cable Tools you need to change the cable 6. change charging cable 6.4 Take the new charging cable out of the box. Check that the rubber sealing ring on the charging plug is in place and not twisted. This is to ensure that the proper ingress protection levels are met (IP54 for EU and NEMA 3R for US). Place the station on its side and plug the cable into the station. Make sure you press the charging cable until it is firmly secured. Bit T30 Warning: Risk of electric shock.
7. charge with Elvi Start charging 1. Plug Elvi charging cable into your car. If you’re using a cable dock (optional) and a type 1 cable, press the release button on the cable plug, then release the cable from the dock, and plug the cable into your car. 2. To start and stop a charging session, you can use a registered charge card, key fob, or your Hey by EVBox app. 3. Hold your charge card (RFID Card) in front of the reader, marked with icon. 4. Elvi reacts with a beep sound.
8. troubleshooting Problem Possible cause Solution Problem Possible cause Solution Charging station does not react No power to charging station • LED ring lights up yellow constantly • • • Vehicle is on a timer Vehicle is fully charged Grounding resistance is too high, with specific vehicles, this must be < 50 Ohm • Charge card is not authorized for charging at this charging station. There is no communication with the Hey by EVBox app. • • • Residual current device prevents charging.
9. warranty 10.1 EVBox warrants its Equipment against Errors and defects in materials and workmanship for twenty-four (24) months from the date of delivery, during which time it will use its best efforts to repair any Errors if any. However, any such problems encountered out of any causes that are not attributable to EVBox shall be for Customer’s risk and account. 10.2 At its sole discretion, EVBox will repair or replace any Errors and/or defective Equipment during the warranty period.
I’m all set! Let’s charge. The present document is drawn up by way of information only and does not constitute an offer binding upon EVBox. EVBox has compiled the contents of this document to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein.
EVBIM_122018 © EVBox B.V.
