User Manual

Step 6: Testing and completion

1. Check all plug connections on the controller and communication module by rmly

pressing all connectors into position and ensuring they’re all in the correct spot (matching

color and size).

2. Power up the unit. The charging station will now carry out an automatic test. The LED ring

around the socket will show the following color indications during the test (max. 60 seconds):

• Red ashing: Starting up, running test protocol, and establishing a connection to

the network.

• Green ashing: Standby, ready for use.

3. Close the covers as shown:

• Hang the cover(s) onto the frame by inserting the

top into the edge of the frame and hinging the

cover(s) downwards. For BusinessLine Double

stations, lift up on the charging cable to give the

cover proper clearance.

• Make sure that the cover(s) lock into the frame

properly and that the rubber seals are in place in

order to guarantee NEMA-3R protection. Check

also that the cover(s) lock securely into the open

notch at the bottom of the frame.

Note: Do not close the cover until the post-installation

checklist is completed (see page 29).

4. Screw the cover(s) back on using the space under

the unit.

• We recommend a mini ratchet to access

tight spaces

5. Test the unit with an electric vehicle or an EVSE tester.