User Manual

Mounting the retractor post

• The retractor post is mounted on a

concrete surface using the four holes

on its base plate.

• We recommend you use deep anchor

bolts for a secure installation.

Attaching the cable to the retractor

• Put the hose sleeve around the charging cable,

and slide it into desired place (g. 1).

• Place the hose clamp around the outside of the

secured hose sleeve, ensuring that the top part of

the clamp is facing up and in the direction of the

reel (g. 2).

• Then, while holding the hose clamp in place, snap it

onto the piece at the end of the cord. Secure hose

clamp to the cord with bolt (g. 3, 4A, 4B).

Fig. 1

Fig. 4A Fig. 4B

Fig. 2 Fig. 3