User Manual

17
EN
Make sure the maximum current settings are correct.
Location
Position the charging station, where possible, in surroundings not subject to extreme
conditions and where it’s not prone to damage. The charging station can either be installed
against a sturdy wall or on the optional stainless steel pole. To accommodate wall mounting,
a wall spacer or wall mount bracket is available as an option. Consult EVBox or your distributor
for more details.
Pre-installation checklist
• The conduits are laid and the correct gauge copper wires are used for installation.
• Cellular network connectivity at the location is good (Networked and RFID only).
• Current capacity of the site is already known (Amps).
• Required tools are available – we recommend a mini ratchet for tight areas.
• An electric vehicle or an EVSE tester is available to complete the installation.
• The mounting option is selected and necessary provisions are made.
• All the units and accessories ordered are delivered, inspected, and free of damage.