SDS
CAS number
%
Chemical name
Common name and synonyms
ProprietaryProprietary ingredient 10 - 20
Specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Move to fresh air. Call a physician if symptoms develop or persist.
Inhalation
Remove contaminated clothing. Wash with plenty of soap and water. If skin irritation occurs: Get
medical advice/attention. Wash contaminated clothing before reuse.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Rinse mouth. Get medical attention if symptoms occur.
Ingestion
Irritation of eyes. Exposed individuals may experience eye tearing, redness, and discomfort. Skin
irritation. May cause redness and pain.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
General information
5. Fire-fighting measures
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Fire-fighting
equipment/instructions
Move containers from fire area if you can do so without risk. Use standard firefighting procedures
and consider the hazards of other involved materials.
No unusual fire or explosion hazards noted.
General fire hazards
6. Accidental release measures
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear
appropriate protective equipment and clothing during clean-up. Do not touch damaged containers
or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation.
Local authorities should be advised if significant spillages cannot be contained. For personal
protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is
possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product
recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Methods and materials for
containment and cleaning up
Avoid discharge into drains, water courses or onto the ground.
Environmental precautions
7. Handling and storage
Avoid contact with eyes, skin, and clothing. Provide adequate ventilation. Wear appropriate
personal protective equipment. Observe good industrial hygiene practices. For product usage
instructions, see the product label.
Precautions for safe handling
Store in a cool, dry place out of direct sunlight. Store in tightly closed container. Store away from
incompatible materials (see Section 10 of the SDS).
Conditions for safe storage,
including any incompatibilities
8. Exposure controls/personal protection
No biological exposure limits noted for the ingredient(s).
Biological limit values
2 / 6
Material name: Evapo-Rust® Super Safe Rust Remover - 1 qt
No. ER004 (Item# 1752536) Version #: 01 Issue date: 08-10-2021
SDS US