Instruction Manual

Adjusting the Trigger

1) Make sure the rie is unloaded by removing pellet

ensure there are no pellets in the breech. Put the gun on

SAFE.

2) Using a 0.89 mm Allen key, turn the screw clockwise

to decrease trigger pull weight and counter clockwise to

increase trigger pull weight.

Please use caution when adjusting the screw.

Adjusting the screw too far counter clockwise can

create a potentially dangerous situation for your rie

or pistol, or can keep the gun from cocking.

Removing the Air Cylinder

1) Remove the scope rail by removing the two allen

screws on the top of the rail (1a). Turn both screws

counter-clockwise until the rail can be lifted off of

the gun (1b).

2) Loosen the cylinder securing screw by turning

counter-clockwise.

3) Once the securing screw is loose, turn the cylinder

counter-clockwise by hand to remove it.