Instruction Manual

Operating the Safety

1) To activate the safety, push the safety catch lever rearward to the “S” (SAFE) position.

When the safety is engaged, the trigger is locked and the rie cannot be red. To

disengage the safety and re the rie, push the safety lever forward to the “F” (FIRE)

position.

Please use caution when decocking the air rie, a pellet may still be in the

breech.

In addition to the safety catch, a loaded and cocked rie can be made safe by

decocking (uncocking). To decock the rie, rst pull the lever down and push it forward

to the open position, exposing the breech. Next, remove the pellet from the breech.

While holding the cocking lever, squeeze the trigger and let the lever return forward

under your control. The rie is now decocked.

When not in use, the rie should be unloaded and uncocked. Leave the bolt closed and

uncocked when not in use.

To prevent unauthorized use, store pellets separate from the rie.

KEEP THE AIR RIFLE ON SAFE UNTIL YOU'RE READY TO

SHOOT, THEN PUSH THE SAFETY OFF.

WARNING:

S = Safe, F = Fire