Instruction Manual

8
Keepyourngeroffthetriggerwhilecockingtheairrie.
WARNING:
to decrease the amount of
rst-stagetravel.Turnthescrew
counterclockwise to increase the
amountofrst-stagetravel.
Second-stage and sear
adjustment
This adjustment screw is
situated in the sear bar. Using
a 1.5mm Allen key, turn the
screw clockwise to decrease
the amount of second-stage travel and sear engagement. Turn the screw
counterclockwise to increase the amount of second-stage travel and sear
engagement.
The adjustment mentioned on page 7 affects sear engagement.
It may be necessary to alter both adjustments to achieve the desired setting.
Adjustment of one screw may affect other settings.
Do not over-adjust, as this may cause the gun to re prematurely
or not operate correctly and make the rie unsafe.
Alwayscheckyoursettingstoensurecorrectandsafeoperationoftherie.
Always ensure that operation of the safety is unaffected by any alterations
you may make to the trigger mechanism.
Trigger blade position
To change the position of the trigger blade, undo the 2.5mm Allen bolt that
secures the trigger blade and move it to the position of your choice.
Adjusting the trigger