Owner's Manual

Figure 2.
CHARGING
The Hunting Master series of air guns must be charged with air at high pressure.
This may be accomplished with either a scuba tank, ARS hand pump or
compressor. While the prefilled scuba tank is the fastest and easiest way to fill the
gun's reservoir, many shooters prefer the portability and independence provided
by the hand pump. The filler hose and probe must be first connected to a scuba
yoke to allow charging with a tank.
To charge with a scuba tank:
1) Make sure the gun is unloaded by removing the magazine.
2) Engage the safety into the safe position.
3) Connect the yoke and hose assembly to the tank.
4) Orient the dust cap at the muzzle end to the reservoir to expose the fill hole.
5) Insert the probe into the fill hole until firmly seated. No threading is required,
but sometimes using a slight twisting motion while inserting the probe will help.
6) Make sure the bleed nut on the yoke is tightened down to prevent air escape.
7) Slowly open the valve on the tank, allowing the high pressure air to equalize
into the reservoir. Once no further air seems to be flowing into the gun (either