Instruction Manual
Safety
To activate the safety, push the safety catch lever rearward to the S position. When the safety
is engaged, the trigger is locked and the rie cannot be red. To disengage the safety and re
the rie, push the safety lever forward to the F position.
In addition to the safety catch, a loaded and cocked rie can be made safe by decocking
(uncocking). To decock the rie, rst pull the sidelever back to the rear position and remove
the magazine. While holding the sidelever, squeeze the trigger and let the lever return
forward under your control. The rie is now decocked.
CAUTION! When decocking the rie, a pellet may still be in the breech.
The Blizzard S10 is tted with a mechanism that prevents double feeding of pellets. If the
rie is double-loaded by mistake, remove the magazine from the rie, close the bolt, point
the rie at a safe target and—when safe to do so—re the rie to remove the pellet(s).
When not in use, the rie should be unloaded and uncocked. Remove the magazine and
leave the bolt closed and uncocked when not in use.
To prevent unauthorized use, store the magazine and pellets separate from the rie.
Keep the air rie on SAFE until you're ready to shoot, then push the safety OFF.
WARNING:
7