Product Manual

4 | P a g e
4. Cleaning and maintenance
 Clean the appliance inside and out with a clean damp cloth every week. If it is dirty,
use sodium bicarbonate dissolved in lukewarm water to clean the unit.
 Never use abrasive products, detergents or soap. After cleaning, wipe out with a
clean damp cloth and dry carefully.
 Do not store product inside unit if the unit is not on
 Do not store the unit if it is wet inside or without leaving the lid open.
 Never clean the unit under running water or in dish water. Do not use abrasive
cleaning agents or hard objects during cleaning as these can damage the unit.
5. Troubleshooting
The unit is not turning on
 Check whether the unit has been turned on
 Check the power supply (try a different power source/vehicle/socket)
 Check whether the plug and the socket have a good connection.
 Check whether the fuse has been burned out or blown
Low refrigeration performance
 Too much product been placed inside the unit
 There is too much warm product inside the unit
 The lid is unlatched / or open
 The lid seal is broken
 Problems arising from poor ventilation (allow 100mm of space around all vents)
 The ambient temperature is too high
 The temperature setting is too high