Installation Instructions

UNPACKING ARTICLE
1. PT 1243 host....................................................................1PCS.
2.
Adaptor
..............................................................................
1PCS.
3. Remote control................................................................. 1PCS.
4. Audio line............................................................................1PCS.
5. Microphone........................................................................ 1PCS.
PARAMETER DESCRIPTION
1.
Output power
.......................................................................
40W.
2. Battery............................................................. 12V/4.5A.
3. Input sensitivity........................................................ 450±50MV.
4.
Signal to noise ratio.
.........................................................
75dB.
5. Input voltage.................................................................... DC15V.
Matters needing attention
1- Read these instructions throughly before using this item.
2- Keep these instructions for future reference.
3- Heed all warnings.
4- Follow all instructions.
5- WARNING: To prevent re or electric shock, do not expose this equipment to rain or moisture. Do not
store or operate this product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or
other apparatuses (including ampli ers) that produce heat.
8- Unplug the unit during lightning storms or when unused for long periods oftime.
9- When wiring this unit and all other equipment used in connection to this unit make sure that all of
your equipment is turned OFF.
10- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension,
cabinets, transducers, brackets and associated equipment for damage. Any missing, corroded,
or non-load rated component could signi cantly reduce the strength of the installation,
placement or array. Any such condition severely reduces the safety of the installation and should
be immediately corrected. Use only hardware which is rated for rated for the loading conditions
of the installation and any possible short-term, unexpected overloading. Never exceed the
rating ofthe hardware or equipment.
11- Refer all servicing to quali ed service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power supply cord or plug is damaged, liquid has been
spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been .
Instruction
HIGH FIDELITY MOBILE BATTERY SPEAKER
MODEL:PT 1243
BEFORE USING PLEASE READ THIS MANUAL CAREFULLY