Data Sheet

6. Thread and tighten the nut onto the threaded

connector barrel.

Ensure the nut is tightened securely to the connector

barrel.

Repeat steps 4-7 for the other cable and rack ear.

8. Connect the other ends of the antenna cables into

antenna A and antenna B inputs of the receiver, or an

antenna distribution device such as the RE3-ACC-

AASP active antenna splitter or RE3-ACC-PASP

passive antenna splitter.

Compatible products

Order number Description

RE3-ACC-RMK1 Rack mount kit for single RE3 receiver

RE3-ACC-RMK2

Rack mount kit for two RE3 receivers

RE3-ACC-CXU2 2 foot antenna coax cable (pair)

RE3-ACC-AASP 2-in x 8-out antenna splitter 470-960MHz

Parts included

Quantity Component

2 CXUF cables

Nuts

2 Lock washers

Rubber insulator rings

1 Engineering datasheet

1 Warranty and product documentation information

card

Ordering information

RE3-ACC-CXUF Rear to front mount antenna cable kit

BNC to BNC 50Ω rear to front-mount antenna coax

cable kit, black

Order number RE3-ACC-CXUF

2 | RE3-ACC-CXUF Rear to front mount antenna cable kit

Represented by:

Germany:

Bosch Sicherheitssysteme GmbH

Robert-Bosch-Ring 5

85630 Grasbrunn

Germany

Bosch Security Systems, Inc.

12000 Portland Avenue South

Burnsville MN 55337

USA

www.electrovoice.com

Document Number F.01U.363.714 | Vs1 | 14. Dec 2018