Data Sheet

Electro-Voice | ETX-10P
ETX-10P
▪ 2000 W amplifier and 134 dB peak SPL
▪ Single-knob DSP includes presets for multiple
configurations and top+sub combinations
(performance style, locations, and space)
▪ Loudspeaker system performance monitoring via
integrated LCD and front panel LED
▪ SST design assures precise and consistent coverage
▪ Designed for floor, stacked, or tilt pole mount (0 or
7.5 degrees) for portable or permanent installation
(Eight (8) M10 threaded suspension points)
ETX-10P from Electro-Voice is a high-power two-way
compact loudspeaker; it can be used in a variety of
portable and permanent applications.
The DSP (Digital Signal Processing) menus offer
extensive configurations, crossovers, selective voicing,
protection limiters, EQ modes, and a lockout mode
prevents casual changes to the system. Loudspeaker
system performance is optimized via an LCD screen.
The front LED indicates power or can be configured to
indicate limit.
EV-patented SST (Signal Synchronized Transducers)
waveguide design provides uniform coverage and
directivity. Waveguides are optimized using advanced
simulation software and propriety algorithms for
precise control and lowest distortion. EV designed and
manufactured transducers include SMX woofer
technology using composite cone materials, flux
stabilizing rings, and thermal management. This
transducer yields lower distortion, smooth response
and high SPL. The high-efficiency DH3-B compression
driver has a convex diaphragm driving a coherent
phase device extending frequency response to 20 kHz.
EV’s FIR-Drive technology utilized the latest FIR (Finite
Impulse Response) filter technology to optimize
transducer linearity and advanced limiter algorithms
for independent peak and thermal transducer
protection. The enclosure is constructed out of
18-mm, 13-ply birch plywood finished with EVCoat.
ETX Powered Loudspeakers combine EV-engineered
intelligent DSP, high-powered amplifiers and
high-efficiency transducers to deliver that legendary
EV sound and performance.
Technical specifications
Frequency Response (-3 dB): 85 Hz – 20 kHz
1
Frequency Range (-10 dB): 65 Hz – 20 kHz
1
Maximum SPL: 134 dB peak
2
Coverage (H x V): 90° x 60°
Power Rating: 2000 W
LF Transducer: SMX2100 254 mm (10 in)
HF Transducer: DH3-B 1.25-in titanium
compression driver
Crossover Frequency: 1700 Hz
Connectors: (2) XLR/TRS combo jack and (1)
XLR link output
Enclosure: 18 mm, 13-ply birch plywood with
EVCoat
Grille: 16AWG steel with powdercoat
Suspension: (8) M10 suspension points
Dimensions (H x W x D): 526 mm x 330 mm x 365 mm
(21 in x 13 in x 14 in)
Net Weight: 20.3 kg (44.8 lb)
Shipping Weight: 22.9 kg (50.5 lb)
Power Consumption: 100 – 240 V~, 50 – 60 Hz, 1.6 –
0.8 A
3