Owner`s manual

1
2
4. OPERATION
4.5 DISASSEMBLING THE SCOOTER
1. Pick up the scooter from the front bumper bracket and have it stand upright. (Fig. 4.5)
2. Next remove the locking pin by pushing the front frame back and releasing the pressure
on the pin. (Fig. 4.6)
3. Tilt the front frame about 45 degrees forward (Fig. 4.7)
4. Pull the front frame upwards to separate it from the rear frame. (Fig. 4.8)
Fig. 4.5 Fig. 4.6
Fig. 4.7 Fig. 4.8
 Suggestion
The assembly process is essentially the disassembly process in reverse. First study the
text and photographs in the disassembly procedure before re-assembling the scooter.
1. PUSH
2. Pull out the
frame connect pin