User's Manual

84
• Write: writes the selected configuration in the SmartKey. (In the case of figure 17 the configuration for client
INFO is written). If the FIX value of the configuration is 1, the writing is irreversible (in case of error,
SmartKey can no longer be used). If it is 0, the SmartKey values can be modified (writing irreversibility
increases the degree of security).
Figure 17
Programming panel of a NET type USB SmartKey
Figure 18 shows the Client Data field. The panel is used for writing the configuration's data. The configuration fields
are as follows:
• Client's' name: the name of the client to whom the SmartKey is assigned
•
Label: SmartKey's label
•
Password: Password of the dongle
•
Data: The memory cells are shown in the data table.
•
Fix after writing: If you select this option, the writing of the configuration on the SmartKey becomes indelible.
The selection of the option can also be seen on the central table of the configuration panel. If FIX is 1, this
means that the option Fix after writing was selected. If it is on 0, this means that the option was not selected.
The values of Client's name, Label and Password can be displayed in ASCII or hexadecimal format, by selecting push
buttons ASCII and Hex. The Data values can be displayed in decimal, ASCII or hexadecimal format, by selecting push
buttons Dec, ASCII and Hex.