User's Manual

80
Figure 12 Reset Default panel of SmartKey
16.4 Map panel
The Map panel is used to associate, with each program, the number of possible executions and licenses.
Figure 13 shows an example of a Map panel used for the configuration of a NET type SmartKey.
The panel has a table with three columns:
• Program No., the program's identification number,
• No. of executions; maximum number of executions
• No. of licenses, maximum number of licenses, i.e. the maximum number of users who can simultaneously use
the program.
If the SmartKey is not of the NET type, there are only two columns: Program No. and No. of executions.Two types of
configurations can be done with the Map panel: One for managing the number of executions and the other for managing
the number of licenses, if using a SmartKey NET. We shall now describe the operations to carry out for the two
configurations:
SmartKey configuration for managing the number of executions
•
In the No. of executions column, input the maximum number of executions on the line referring to the
program. The value can vary from “-1” to “65,535”. Value "-1" is interpreted by SmartKey as "Unlimited
executions":
• Do not type any value in the No. of licenses column. This column is displayed only if you are configuring a
SmartKey NET.
• After dealing with all the programs, press the Write push-button to write the configuration values on
SmartKey.
SmartKey configuration for managing the number of licenses (For SmartKey NET only)
• In the No. of executions column, input value "-1" on the line referring to the program.
• In the No. of licenses column, input the number of licenses on the relevant line. The number can vary from “0”
to “50”.