User's Manual

76
Figure 6
SmartKey Configuration Central: client mode
The Multilan Client window provides the following options:
•
Program type: enables selection of the type of program to be protected: Windows, Windows 3.1 (16 bits) and
DOS (16 bits).
•
Use Local protocol…: if enabled, it always searches the SmartKey in local protocol even if this protocol is not
explicitly input.
• Display a message…: if enabled, it shows - in a window - all the errors occurring during communication with
the SmartKey. This option is very useful for identifying communication problems.
15.2.1 Selection and configuration phases
When the Add key is pressed, a window as in figure 7 is shown, where one can choose one of the three types of
protocols available.
Figure 7
Protocol selection panel
If you choose the Novell Ipx or Local protocol, no further parameters need be input. If you choose the ANP protocol,
the ANP Protocol window is opened as shown in figure 8 and you have to input the name of the shared directory to be
used for communication between server and client. If you choose the TCPIP protocol, the TCPIP Protocol window is
opened as shown in figure 9 and you have to input the server's symbolic or numeric name and its port.