User's Manual

CryptoIdentity User Guide – 3. Working with CryptoIdentity Utilies
• Wait while the initialization process runs; at the end a window pops up:
The initialization process sets into CryptoIdentity the default configuration.
To customize the CryptoIdentity configuration, refer to section "1.1.4
CryptoIdentity default configuration "
To change the CryptoIdentity Security Officer PIN:
• Choose the USB port where the CryptoIdentity is plugged, and press Change SO PIN
button:
• In the first edit box enter the current Security Officer PIN, in the second and third one
enter the new value to assign (it must be confirmed in the third edit text field) and press
OK. If no error occurs, the Security Officer PIN is changed successfully.
If this is the first time that the Security Officer PIN is about to be changed,
insert as current Security Officer PIN the value “11111111” (refer to
section "1.1.3 CryptoIdentity default PINs").