Instruction manual

Instruction Manual PCD 650
70
Figure 63 : Concentration calibration
3.11.1 Concentration Calibration Report
Calibration report gives you information on calibrated temperature and calibration at
pressure and salinity. It includes date & time on which the last calibration was done
and the offset.
To View Concentration Report:
1. From concentration measurement mode, press left or right arrow key
to navigate to other available functions until you see REPO function in the
LCD.
2. Press REPO (F2) key. The calibration report is shown in the display [Figure
53].
3. Press PRIN (F2) to transfer the calibration report to the computer. (Refer
page 37 to print data)
Figure 64 : DO report screen in mg/L mode
Note: The function of the keys available on the concentration calibration/
report screen is same as previously described in saturation calibration.