User Guide

Instruction Manual CON 400/410
- 38 -
12. Press the MI/S or MR/T keys to toggle to the correct
hour. Note the “AM” and “PM” indicator on the lower
portion of the display.
13. Press the ENTER key to confirm the hour and move
to “minute” selection. The “minute” digits will flash.
14. Press the MI/S or MR/T keys to toggle to the correct
minutes.
15. Press the ENTER key to confirm the minutes and
move to “second” digits will flash. See Figure 34.
16. Press the MI/S or MR/T keys to toggle to the correct
seconds.
17. Press the ENTER key to confirm the seconds and
return to “century” selection.
18. Press the CAL/MEAS key to return to the subgroup
menu. Press the CAL/MEAS key again to return to
measurement mode.
NOTES
Press the CAL/MEAS key at any point while setting the
time to return to the subgroup menu.
Figure 34 - Selecting hour,
minutes and seconds