User Guide

Instruction Manual CON 400/410
- 37 -
7.8 P7.0: Setting the real-time clock
The meter features a real-time calendar and clock. This
helps you to meet the Good Laboratory Practice (GLP)
standards.
From measurement mode
1. Press SETUP key to enter Set Up mode.
2. Press the MI/S or MR/T keys to scroll through
subgroups until you view parameter P7.0.
3. Press the ENTER key to enter parameter P7.0. The
meter lets you select the century: “19—“ or “20—“. The
century digits will flash.
4. Press the MI/S or MR/T keys to toggle to the correct
century.
5. Press ENTER key to confirm the century and move to
“year” selection. The “year” digits will flash.
6. Press the MI/S or MR/T keys to toggle to the correct
year. See Figure 33.
7. Press ENTER key to confirm the year and move to
“month” selection. The “month” digits will flash.
8. Press the MI/S or MR/T keys to toggle to the correct
month.
9. Press the ENTER key to confirm the month and move
to “date” selection. The “date” digits will flash. See
Figure 33.
10. Press the MI/S or MR/T keys to toggle to the correct
date.
11. Press the ENTER key to confirm the date and move to
“hour” selection. The “hour” digits will flash. See Figure
34 (next page).
Figure 33 - P5.0: Setting century,
year, month and date