User Guide

5.3 TAKING MEASUREMENTS....................................................25
5.3.1 To take measurements:...............................................25
5.4 TAKING PRESSURE/SALINITY COMPENSATED DO
MEASUREMENTS .............................................................................26
5.4.1 Pressure Setting Adjustment.......................................26
5.4.2 Salinity Setting Adjustment.........................................29
6 HOLD FUNCTION..................................................................30
7 ADVANCED SETUP FUNCTIONS.......................................31
7.1 ADVANCED SETUP OVERVIEW ............................................31
7.1.1 To enter the % Saturation or Temperature Set Up
menu: ....................................................................................31
7.1.2 To enter the mg/L (ppm) Concentration Set Up menu:...
....................................................................................31
7.2 (COF.1) CONFIGURATION MENU ........................................36
7.2.1 Selection of Automatic Temperature Compensation ..36
7.2.2 Selection of mg/L or ppm mode..................................38
7.3 (CAL.2) CALIBRATION DATA .............................................39
7.3.1 Viewing the % Saturation calibration data ................39
7.3.2 Viewing the mg/L (ppm) Concentration calibration
data ....................................................................................39
7.4 (ELE.3) ELECTRODE PROPERTIES .......................................40
7.4.1 Viewing the electrode Slope Factor............................40
7.4.2 Viewing the % Saturation Offset (Only available in %
Saturation or Temperature Set Up menu):.................................40
7.4.3 Viewing the 100% Saturation mV value.....................41
7.4.4 Viewing the 0% Saturation mV value.........................41
7.5 (ATO.4) AUTOMATIC OFF ...................................................43
7.6 (RST.5) RESET TO FACTORY DEFAULT ................................44
7.6.1 Calibration Reset........................................................44
7.6.2 User Reset...................................................................46
7.7 (OFS.6) % SATURATION OFFSET ADJUSTMENT ..................47
7.8 (DPR.7) DISSOLVED OXYGEN PARAMETERS .......................49