User Guide

Instruction Manual CyberScan pH5500/ 5000
This screen allows you to select what criteria are stored in the meter’s
memory with the measurement when you save the data. Data is
stored only if a Sample ID# has been assigned. The status of the
current data storage criteria is displayed on the screen. The criteria
option is active if “ON” appears to the right on the screen. It is inactive
if “OFF” appears to the right of the option. All storage criteria will be
stored in the meter’s memory with the measurement. However, only
active items will appear on the View Stored Data screens. Changing
the status of the storage criteria to active from inactive will allow the
criteria to be displayed with the previously stored data.
To Set Data Storage Criteria
1. Access the Set Data Storage Criteria screen from the pH (mV,
Ion) Setup screen. The current Data Storage Criteria are
displayed on the screen.
2. Use the arrow keys to highlight the data storage criteria you
want to modify.
3. Touch ON or OFF to change the status of the criteria.
4. Repeat steps 2 and 3 with the remaining criteria.
5. Touch save to save the entire group of data storage criteria and
return to the pH (mV, Ion) setup screen.
OR
Touch exit to return to the pH (mV, Ion) setup screen, without
making any changes.
The Date/ Time/ Channel criteria and the Measurement criteria are
always active and cannot be deactivated. These criteria will always
be stored with the measurement value. Because they cannot be
changed, they will not be highlighted when using the arrow keys.
64