User Guide

Instruction Manual CyberScan pH5500/ 5000

The CyberScan pH5500 is a multi-channel meter. With this meter you

can switch from channel 1 to channel 2. You can also view both

channels at the same time by accessing the dual channel mode. If

you set the meter to view both channels, you cannot change the

parameters without choosing the screen that you want to modify. The

setup parameters for each screen independently of one another.

Choosing a channel

1. Touch anywhere on the standby screen.

Touch channel on the main screen

THEN

2. Touch 1, 2 or dual to access the channel that you want to view.

To access System Setup from the standby screen

1. Touch anywhere on the standby screen.

2. Touch 1, 2 or dual to access the channel that you want to view.

3. Touch setup.

4. Touch system on the setup screen.



If you are in any measure mode, touch mode until you access the

main screen.