User Guide

Instruction Manual CyberScan pH1500
14
4.1.2 P2.0 View pH Electrode Slope
This setup menu allows you to view the pH electrode slope in % after
2-point standardization is successfully done.
pH
View


 press to set value
press to accept
enter
ELECTRODE
% SLOPE
To View pH Electrode Slope
1. Access the View pH Electrode Slope menu from the pH Measure
screen by pressing the setup key.
2. Press ▲ and ▼ keys to scroll until display shown as above.
save

view

3. Press enter to view the offset. A series of dashes “- - -“ will be
displayed if the unit has not been standardized
pH % SLOPE