Instruction manual

4
3. PREPARATION
3.1.1 Inserting the Batteries (Standard CyberScan PC 10)
The CyberScan is packaged with 4 “AAA” alkaline batteries required for operation. To insert
the batteries into the CyberScan, follow the procedure outlined below.
1. To open the battery compartment, press down the catch of the battery cover. See Figure
4a below.
2. Note the polarity and insert the batteries into the battery compartment correctly (Figure
4b).
3. Replace the battery cover into its original position, ensuring the catch is lock into its
position.
Your CyberScan hand-held meter is now ready for operation.
Figure 4b: Battery position
Figure 4a: Back panel of meter
showing battery compartment